GEOPRIV M. Thomson Internet-Draft J. Winterbottom Intended status: Standards Track Andrew Expires: June 5, 2009 December 2, 2008 Location Measurements for IEEE 802.16e Devices draft-thomson-geopriv-wimax-measurements-01 Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on June 5, 2009. Thomson & Winterbottom Expires June 5, 2009 [Page 1] Internet-Draft Location Measurements for 802.16e December 2008 Abstract IEEE 802.16e defines means for true mobility within an 802.16 wireless network. Determining an accurate location for 802.16e devices requires information on radio parameters. A format is defined for location-related measurement data that can be provided by an 802.16e device. This measurement data can be used by a Location Information Server (LIS) to more accurately determine the location of the device. A separate measurement used for identifying WiMAX session-related parameters is also provided. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Conventions used in this document . . . . . . . . . . . . . . 4 3. 802.16e Radio Measurement Data . . . . . . . . . . . . . . . . 5 4. WiMAX Session-Related Measurements . . . . . . . . . . . . . . 7 5. 802.16e Measurement Schema . . . . . . . . . . . . . . . . . . 8 6. Security Considerations . . . . . . . . . . . . . . . . . . . 11 7. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 12 7.1. URN Sub-Namespace Registration for urn:ietf:params:xml:ns:held:lm:802.16e . . . . . . . . . . 12 7.2. XML Schema Registration for 802.16e Measurement Schema . . 12 8. Normative References . . . . . . . . . . . . . . . . . . . . . 13 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 14 Intellectual Property and Copyright Statements . . . . . . . . . . 15 Thomson & Winterbottom Expires June 5, 2009 [Page 2] Internet-Draft Location Measurements for 802.16e December 2008 1. Introduction Determining the location of a device in an IEEE 802.16e [IEEE.80216E] mobile wireless network requires information from the device to improve the accuracy of the final result. Radio timing information provided by the device can enable the calculation of a more accurate location estimate by a Location Information Server (LIS). This document describes a standard format for 802.16e measurement data that is based on radio measurements made of base stations near the device. Thomson & Winterbottom Expires June 5, 2009 [Page 3] Internet-Draft Location Measurements for 802.16e December 2008 2. Conventions used in this document This document builds on [I-D.thomson-geopriv-held-measurements] and consequently uses the same set of terminology. Terminology from [IEEE.80216E] is used where appropriate. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. Thomson & Winterbottom Expires June 5, 2009 [Page 4] Internet-Draft Location Measurements for 802.16e December 2008 3. 802.16e Radio Measurement Data A subscriber station (SS) in an 802.16e network is able to observe radio signals from each base station (BS) in its proximity. By observing the timing and strength of these signals, a SS is able to provide a LIS with information that can be used to determine its location. The most basic 802.16e measurement indicates the serving BS, as shown in Figure 1. civic Figure 1: HELD Location Request with 802.16e Measurement Data More measurement information can be provided, including timing measurement information for additional serving base stations (if fast base station switching (FBSS) or macro-diversity hand-over (MDHO) are in progress). Information on neighbouring base stations can be provided in addition to that for the serving BS. The set of measurement data is chosen by the SS and the presence of specific elements will depend on the time the SS has available to acquire the measurements. The following measurement information may be provided: id: (Attribute) The base station identifier for the measured BS. Note that while this isn't a MAC address, it shares the encoding defined for the MAC address. rssi: Receive signal strength indicator, calculated as defined in [IEEE.80216E]. This value is measured in units of dBm. This datum optionally includes an RMS error in dB and sample count. cinr: Carrier inteference to noise ratio (signal to noise), calculated as defined in [IEEE.80216E]. This value is measured in units of dB. This datum optionally includes an RMS error and sample count. Thomson & Winterbottom Expires June 5, 2009 [Page 5] Internet-Draft Location Measurements for 802.16e December 2008 rd: Relative delay of the signal from the BS, measured relative to other base stations. Since this value is relative, it MUST be included on at least two BS measurements to be of any use. It is RECOMMENDED that this value be set to "0" for the first BS in the measured set. This datum optionally includes an RMS error and sample count. (V) _ | `- _ t[1] | `- _ t[2] | BS1 ` . - - - - - - - - - - (V) _|`. | |U| `. t[3] | |_| `. BS2 | Target SS `. (V) | | | BS3 Figure 2: Relative Delay Example Based on the example in Figure 2, relative delay can be calculated based on the relative time that signals transmitted simultaneously (or with known relative times) by base stations can be calculated. If the time of receipt of the signal from each base station is t[x] and the relative delay for BS1 is set to zero, the relative time for each subsequent measured base station is t[x] - t[1]. rtd: Round trip delay of the signal from the SS to the BS and back. This measurement datum is only applicable for each serving BS. This value is measured in seconds. This datum optionally includes an RMS error and sample count. The "rmsError" attribute for signal to noise and received signal strength MAY be calculated using the continuous weighted average method described in [IEEE.80216E]. Values of "alpha_AVG" and "k" are selected by the SS. The XML format described in this document provides a greater range of values than the Scanning Results Report ("MOB_SCN-REP") or the Channel measurement Report Response ("REP-RSP") message. This allows for the reporting of measurements in a manner less constrained by encoding. A greater range of values does not necessarily imply anything about the uncertainty in those measurements; the RMS error is used to indicate the magnitude of any error. Thomson & Winterbottom Expires June 5, 2009 [Page 6] Internet-Draft Location Measurements for 802.16e December 2008 4. WiMAX Session-Related Measurements In Worldwide Interoperability for Microwave Access (WiMAX) networks [WiMAX.LBS], an SS might have a particular access network designated as a "home network". In some configurations the network is designed in such a way that the SS only has access to a location server in the home network, known as a home location server, or hLS. However, a server in the current (visited) access network--the vLS--could be the only server that is capable of communicating with the access network to determine the location of the SS. In this case the hLS provides WiMAX session information to the vLS, giving the vLS the information necessary to identify a session and generate location information. Figure 3 shows an example measurement that contains information regarding a session. This contains the session identifier that is assigned by the anchor authenticator. The Network Access Identifier (NAI) [RFC4282] of the device and the address of the anchor authenticator is included. 19abd9e9f923978f80310d user.206417@example.realm f-301.aa.example.com Figure 3 Session parameters are used to identify a particular network attachment session: sessionID: A temporary identifier given to a particular session. nai: The NAI [RFC4282] used by the device to gain network authorization. anchor: The domain name of the anchor authenticator in the visited network. Optionally, this includes an attribute that indicates an IP address in addition to the domain name. Thomson & Winterbottom Expires June 5, 2009 [Page 7] Internet-Draft Location Measurements for 802.16e December 2008 5. 802.16e Measurement Schema Note: The pattern for NAI has extra whitespace added to conform to formatting restrictions. The actual value does not contain whitespace. This document defines a location-related measurement format for 802.16e mobile wireless devices. Thomson & Winterbottom Expires June 5, 2009 [Page 8] Internet-Draft Location Measurements for 802.16e December 2008 Thomson & Winterbottom Expires June 5, 2009 [Page 9] Internet-Draft Location Measurements for 802.16e December 2008 Thomson & Winterbottom Expires June 5, 2009 [Page 10] Internet-Draft Location Measurements for 802.16e December 2008 6. Security Considerations The considerations of [I-D.thomson-geopriv-held-measurements] apply. However, the receiver of 802.16e measurement information requires knowledge of the location of base stations to make effective use of the information. NAI is used as identification information for a device. The connection of this information with other session parameters provides a potential link between identity and location. In addition, unless care is taken to verify this information, this datum could be exploited by an attacker to gain access to another user's location information. See the privacy and security considerations of [I-D.winterbottom-geopriv-held-identity-extensions] for details on using identity parameters. Thomson & Winterbottom Expires June 5, 2009 [Page 11] Internet-Draft Location Measurements for 802.16e December 2008 7. IANA Considerations 7.1. URN Sub-Namespace Registration for urn:ietf:params:xml:ns:held:lm:802.16e This section registers a new XML namespace, "urn:ietf:params:xml:ns:held:lm:802.16e", following the guidelines in [RFC3688]. URI: urn:ietf:params:xml:ns:held:lm Registrant Contact: IETF, GEOPRIV working group, (geopriv@ietf.org), Martin Thomson (martin.thomson@andrew.com). XML: BEGIN 802.16e Measurements

Namespace for 802.16e Measurements

urn:ietf:params:xml:ns:held:lm:802.16e

[[NOTE TO IANA/RFC-EDITOR: Please update RFC URL and replace XXXX with the RFC number for this specification.]]

See RFCXXXX.

END 7.2. XML Schema Registration for 802.16e Measurement Schema This section registers an XML schema following the guidelines in [RFC3688]. URI: urn:ietf:params:xml:schema:held:lm:802.16e Registrant Contact: IETF, GEOPRIV working group, (geopriv@ietf.org), Martin Thomson (martin.thomson@andrew.com). Schema: The XML for this schema can be found in Section 5 of this document. Thomson & Winterbottom Expires June 5, 2009 [Page 12] Internet-Draft Location Measurements for 802.16e December 2008 8. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, January 2004. [RFC4282] Aboba, B., Beadles, M., Arkko, J., and P. Eronen, "The Network Access Identifier", RFC 4282, December 2005. [I-D.thomson-geopriv-held-measurements] Thomson, M. and J. Winterbottom, "Using Device-provided Location-Related Measurements in Location Configuration Protocols", draft-thomson-geopriv-held-measurements-03 (work in progress), October 2008. [I-D.winterbottom-geopriv-held-identity-extensions] Thomson, M., Tschofenig, H., Barnes, R., and J. Winterbottom, "HELD Identity Extensions", draft-winterbottom-geopriv-held-identity-extensions-07 (work in progress), November 2008. [IEEE.80216E] IEEE, "Air Interface for Fixed and Mobile Broadband Wireless Access Systems; Physical and Medium Access Control Layers for Combined Fixed and Mobile Operation in Licensed Bands", Std 802.16E, February 2006. [WiMAX.LBS] WiMAX Forum, "WiMAX Network Protocols and Architecture for Location Based Services", Network Release 1.5 1.0.0 Draft, November 2008. Thomson & Winterbottom Expires June 5, 2009 [Page 13] Internet-Draft Location Measurements for 802.16e December 2008 Authors' Addresses Martin Thomson Andrew PO Box U40 Wollongong University Campus, NSW 2500 AU Phone: +61 2 4221 2915 Email: martin.thomson@andrew.com URI: http://www.andrew.com/ James Winterbottom Andrew PO Box U40 Wollongong University Campus, NSW 2500 AU Phone: +61 2 4221 2938 Email: james.winterbottom@andrew.com URI: http://www.andrew.com/ Thomson & Winterbottom Expires June 5, 2009 [Page 14] Internet-Draft Location Measurements for 802.16e December 2008 Full Copyright Statement Copyright (C) The IETF Trust (2008). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Thomson & Winterbottom Expires June 5, 2009 [Page 15]